Motorola Gm950 Plus Software ??? ??? Download File ===> =2syZ2oTurn off the radio and press the dual RANGES button. The softpot should appear. Press and hold the softpot and turn the radio on. Press the softpot and wait until the sound level is three bars. After a few seconds release the softpot. The tones should now be audible. The default settings should be 25kHz channel spacing. Now keep the softpot pressed. Press and hold the softpot again. Release the softpot. Press and hold the softpot and wait until the sound level is three bars. After a few seconds release the softpot. The tones should now be audible. The default settings should be 25 kHz channel spacing.The next thing I did was to download the Motorola's gateware boot (GM950A_BOSSU). Just download it via the download link in the Motorola R/C site. Next flash the OS to your radio. Then use USB Programming Utility to program your radio to the latest firmware.The programming results were very disappointing. The system was not recognized by the programming utility. To make sure that there was no issue my PC/Laptop was an Acer Travelmate 5339. The software was supplied with a Windows 7 PC. The firmware was supplied on either a exe or a.ipk file.I opened the.air file. It looked like this. There was a menu item "GM 950A" in the shareware. When you double click it a new tab with the seed information will open. In my case the seed was "97d771898db0fcb422f1042b5b7686a8". d441842882
motorola gm950 plus software free download
2ff7e9595c
Comments